Navigation:  Bienvenue sur BeerSmith! > Créer une Recette >

L'Onglet Minuteur

Previous pageReturn to chapter overviewNext page

The brewday L'Onglet Minuteur is a new feature added in BeerSmith 2.1.  It gives you a simple timer for mashing/steeping and also a separate boil timer.  Below the timer are step-by-step instructions that scroll as you brew to show the next steps.  It also has a built in alarm to tell you when major events occur.

 

Voir aussi : Brassage

 

Displaying the L'Onglet Minuteur

oOpen a recipe by double clicking on it
oClick on the L'Onglet Minuteur button in the open recipe

 

Mashing/Steeping with the L'Onglet Minuteur

oFor all grain recipes, the top timer is used for mashing.  The steps shown are for the mash profile you selected for this recipe (see Mash tab).
oFor extract recipes it will show the steeping steps if you are steeping any grains.  The steep time and temperature for steeping grains in an extract recipe are set using the steep grain temp and time fields below the steep timer box (which is disabled for recipes using a mash).
oTo start the timer, use the play button next to the mash/steep timer.  To pause it, use the pause icon.  To reset the timer back to zero use the reset icon.
oYou can also set the timer to a particular time using the ste button.
oAs the timer progresses it will show each step, and play an alarm when the next step time is reached.
oAs old steps are finished, they will be greyed out and then removed from the list after a few minutes.

 

Boiling with the L'Onglet Minuteur

oThe bottom (boil) timer and steps on the L'Onglet Minuteur are used for timing the boil.
oBoil steps (including first wort Houblons and aroma Houblons steeped at the end of the boil) are listed in the area below the boil timer.
oTo start the timer, use the play button next to the boil timer.  To pause it, use the pause icon.  To reset the timer back to zero use the reset icon.
oYou can set the timer to a particular point in the process using the set button.
oAs the timer progresses it will show each step with its time, and play an alarm when the next step time is reached.
oAs old steps are finished, they will be greyed out and then removed from the list after a few minutes.